Evinrude 30 HORSEPOWER MFE, Operator'S Manual

Page: 17 / 60

15

F
UEL AND
O
IL
OIL REQUIREMENTS
Evinrude/Johnson XD100 is the ONLY
outboard oil recommended for use with
Evinrude MFE outboards. Evinrude/Johnson
XD100 outboard oil MUST be used when
outboard is run on heavy fuels. Evinrude/
Johnson XD100 oil MUST be used when
operating in temperatures under 32°F (0°C).
In combat emergency if
Evinrude/Johnson
XD100 oil is not available, you must use an oil
that meets NMMA TC-W3 certification stan-
dards. Operating time should be limited to the
duration of the combat emergency and the
operator should return to operating on Evin-
rude/Johnson XD100 as soon as possible.
IMPORTANT: Failure to follow oil specifica-
tions could void the engine warranty if a lubri-
cation-related failure occurs.
Filling the Oil Tank
Release rear engine cover latch by pulling the
handle back and turning downward.
Pull up on the tilt handle to release the engine
cover seal on the engine cover.
Release the hook from its catch in the front
and remove the engine cover to access the oil
tank.
Remove the filler cap and fill the tank with the
recommended outboard lubricant, as speci-
fied in Oil Requirements on page 15.
Replace the filler cap and tighten securely.
Reinstall the engine cover.
IMPORTANT: The oil tank capacity is 1.5
quarts (1.4 liters).
007000
1. Tilt handle 007001
1
007002
007003