8
2551988C
Hydraulic connections
Connection arrangement.
Ensure that the hydraulic connections of the pipework piped up to the unit are
correct and follows the hydraulic schematic. The manufacturer cannot accept any
responsibility for any damage caused to the unit due to crossed connections.
Any Evinox engineer callout/visit due to this issue will be chargeable.
The ModuSat unit is designed to be wall mounted with
the typical primary and secondary connections as
shown below.
The Evinox Energy flushing by-pass valve kit should be
installed prior to connecting the unit and the valves
left in an isolated position.
The whole system should be cleaned and flushed
before installing the cooling interface unit to ensure
the ModuSat unit is not damaged.
Wall fixing
The ModuSat unit is designed to be wall mounted. There are drillings on the back plate of the unit
that ensure mounting with the wall fixing bracket.
Wall fixing
Installer must ensure that appropriate fixings are used.
