manualshive.com logo in svg

Evil Mad Scientist axidraw, User Manual

Share
Download
Evil Mad Scientist axidraw User Manual Download Page 20

20

9: Plotting with the AxiDraw

9.1 Making your first plot

In this section we will walk through the steps to make your first plot on the AxiDraw. Finish 

installing the AxiDraw software (§4) before beginning here. 

In addition to what comes with 

the AxiDraw, you will need pen and paper.

Download the set of AxiDraw example files from 

http://axidraw.com/ex

   

The download is a small zip archive of example files. Open/unzip , and from within Ink-

scape open up the file called AxiDraw_First.svg . Once open, the document should look 

approximately like this:

If you cannot see the full page outline when you first open the file, select from the menu 

View > Zoom > Page, or type the number ‘5’ on your keyboard.

8.6 Summary

Your AxiDraw is now ready to print. To recap, the steps in getting ready are:

1)  Move the pen holder to the Home Corner.

2) Connect Power and USB cables.

3) Use the software to move the pen holder to the “pen-up” position.

4) Insert the pen, just above the paper.

5) Position your paper with its corner beneath the tip of the pen. 

Summary of Contents for axidraw








































Reviews:

No comments

Brands by name

Popular brands

Load more brands