[Meggy Jr RGB]
[17]
STEP 15: Putting Meggy Jr in the Handle Set
Parts
#26
&
27
are nylon screws and acorn nuts
These parts are used to attach the upper and lower shell of a
handle set.
Use no tools
with these! Hand tighten, only as much
as needed, by turning the acorn nut. Over-tightening could easily
crack the plastic of the handle set.
Mounting the handle set
The top shell of the handle set (the
carapace
) fits neatly over the
LED display, with cutouts for the speaker, buttons, and screw holes.
Drop the four nylon screws through the screw holes to help index
the lower shell.
The lower shell (the
plastron
) fits on the bottom side with cutouts
for the battery box, the battery box wires, as well as the optional ISP
connector and power jack. Use the nylon screws from the top side
to help guide the lower shell into place, and secure it in place --
gently-- with the nylon acorn nuts.
“Basic handles” shown; other
types mount the same way.
Screw hole locations
(arrows)
