E2230
Rev 09.03.2021
STA WiFi configuration
To connect the device to an existing WiFi network, choose the WiFi network you are using
from the list and enter it to the SSID (Service Set Identifier) field, enter the password and
click save. You can then access the device within your local WiFi network by navigating to
the device IP. If DHCP was selected while configuring, the user can get information about
its IP address in the Network Information page. If DHCP was not selected, the user can
navigate to the device within the local WiFi network by its assigned IP address.
Note! Manually assigning IP addresses to the device should be done accordingly to LAN
network settings. e.g. IP address, subnet mask and router IP should be configured by
taking into regard network settings of the connected WiFi network..
Note 1: Time will be saved until reboot. After reboot the configuration will revert back to
unconfigured state.
Note 2: E2230 can be configured using Plurasens configurator. If the device is connected to
the computer via USB, configuration via Wi-Fi can not be done.
12
