EVGA Z790 CLASSIFIED User Manual Download Page 110

Page: 110 / 121

EVGA Z790 CLASSIFIED (121-RL-E798)

- 110 -

Multi-function LED indicator

EVGA Z790 CLASSIFIED board is equipped with a versatile display to allow real-time

monitoring of system status during and after the BIOS POST process. The operating
mode can be configured in the BIOS Setup in the Advanced menu, and then H/W

Monitor Configuration. The Debug Port Display setting selects the OS display mode.

There are multiple modes available:



[Temp.] CPU – displays external CPU die temperature sensor readout in real-

time. Use this mode to read negative temperatures.



[Temp.] PWM – displays VRM temperature sensor readout in real-time after

BIOS POST completion.



[Temp.] SYS – displays motherboard bay temperature sensors.



[Temp.] Ext. Thermal – displays temps reported by the Ext. Thermal Sensor.



[Temp.] VDIMM VRM – displays VDIMM VRM temperature sensors.



[Temp.] PCH – displays PCH temperature sensors.



[Volt.] Vcore – displays CPU VCORE after BIOS POST completion.



[Volt.] CPU VCCIN AUX – displays CPU Input Voltage after BIOS POST

completion.



[Volt.] CPU VDD2 – displays CPU Memory Controller voltage after BIOS

POST completion.



[Volt.] CPU 1.8V – displays CPU 1.8V voltage after BIOS POST completion.



[Volt.] CPU 1.05V – displays CPU 1.05V voltage after BIOS POST completion.



[Volt.] PCH 1.05V – displays PCH 1.05V voltage after BIOS POST completion.



[Volt.] PCH 0.82V – displays PCH 0.82V voltage after BIOS POST completion.



[Volt] VCC – displays the +5V rail voltage after BIOS POST completion.



[Volt] VCC3 – displays the +3.3V rail voltage after BIOS POST completion.



[Volt] 12V – displays the +12V rail voltage after BIOS POST completion.



POST Code – displays only BIOS POST completion.



Turn Off - completely deactivates Multi-function LED display

The Debug Port Display menu in the BIOS Setup allows you to pick specific sensors to

be displayed on the Multi-function Display.
These temperatures and voltages can also be seen in the BIOS setup window in real-

time, for a quick overview.
The recommended settings to display during overclocking are “[Temp.] CPU” and

“[Volt.] Vcore”.

Summary of Contents for Z790 CLASSIFIED


























































































































Search results

Summary of Contents for Z790 CLASSIFIED

Reviews:

Related manuals for Z790 CLASSIFIED

Brands by name

Popular brands

EVGA Z790 CLASSIFIED, User Manual

Search results

Summary of Contents for Z790 CLASSIFIED

Reviews:

Related manuals for Z790 CLASSIFIED

Brands by name

Popular brands