7
Configuring Precision X Mobile for the EVGA SC17
GEFORCE® GTX 1080 GAMING
PrecisionX Mobile is designed to be the monitoring and tuning suite for your EVGA
SC17 GEFORCE® GTX 1080 GAMING. This will cover monitoring in the upper
section as well as specific controls for the CPU, Motherboard, Graphics card,
lighting, and general non-performance/appearance options.
On the upper right side of the main screen there are 5 buttons that control overall
performance aspects of the EVGA SC17 GEFORCE® GTX 1080 GAMING.
Custom:
This tab will allow you to save custom CPU and GPU overclocking
values.
Superclock:
This setting forces the CPU to run at its boost clock value of 3.9GHz
and also pushes the GPU to Boost clock mode as well.
Normal:
Default mode. This allows the CPU and GPU to use its boost and
throttling functions by default based on load.
Silent Mode: CPU runs at default values, GPU cannot go into boost mode, and
cooling fans run at a reduced fan speed.
Downclock:
Forces the EVGA SC17 GEFORCE® GTX 1080 GAMING to run in a
throttled state, uses reduced performance for low demand apps,
significantly reduces heat, and extends battery life.
Fan Control:
This will open 2 graphs, one for CPU and one for GPU, to let you
control the balance of temp and fan noise. If the curve is manually
set too low for some loads, the fans will ramp up to 100% on their
own when there is a risk of hardware damage.
FAN BOOST:
The FAN BOOST button located at the bottom of the center menu
will increase all fans to 100% ignoring all preset fan curve
information
Summary of Contents for SC17G GAMING
Page 11: ...11 ...