750W / 850W Bronze Power Supply User Manual
Q&A
Q: I see there are
more than 4 screw holes
on the back of the power supply, but the packaging only offers (4)
screws,
are some missing?
A:
Nothing is missing
; you will only need to attach the EVGA power supply to the case with 4 screws.
The power supply offers more than (4) holes to
provide optimal compatibility
for today’s varied case designs.
Q: My EVGA Power Supply includes (2)
EPS cables
for my motherboard, do I need to connect up both?
A: Motherboards
only require (1) 4+4 or 8pin EPS connection
. On some models, an additional 4+4pin or 8pin
connection on the motherboard may be available for
dual CPU
configurations or for
extreme over clocking
. If your
motherboard support dual 4+4pin EPS connections, please refer to your
motherboard manufacturer’s manual
for
details on the proper function and power if the EPS connections.
Q: What if I want to use
power adapters
for my video card(s)/motherboard/peripherals?
A: EVGA always recommends the use of
direct power connections
from the power supply to power the video
card(s), motherboard connections and other auxiliary power connections for optimal power distribution.
Q: Does it matter
which end of the cable
I plug into the power supply?
A: Yes, the connections going to the power supply, will not have “break downs” like the EPS (CPU) has 4+4 on
one side and full 8-pin on the other. Another example is the 24-pin cable, you can see on the PSU side it is a
total of 28 pins, where the 24-pin connection will go to the motherboard directly.
Check each cable
as it is labeled
appropriately to match the power supply side and connect only the same
“matching”
cable directly to the power
supply as referenced on each connector.
Q: I plugged everything in and the system will not POST, or goes into a boot loop.
A: Power the PSU off and double check to make sure all the power connections are firmly seated on the
motherboard and on the PSU side. If the problem persists you will want to try testing the 24-pin using the
provided PSU tester. If the PSU tests ok, then you will want to try testing the motherboard in “barebones” to get
a POST, removing everything except for the CPU and heatsink, 1 stick of RAM, 24-pin and 8-pin power connections.
Q: If I have an issue or a question, can I get support?
English
5
A: ALL EVGA products are backed by top tier warranties as well as 24/7 technical support. Support can be reached
for your power supply at:
- USA:
+1-888-881-3842
option 1, option 3. or contact us via email at
.
- Europe:
+49 89 189 049 11
or by email via
eu.evga.com/support.