EVGA X79 Motherboard
19
Connecting Internal Headers
Front Panel Header
The front panel header on this motherboard is one
connector used to connect the following four cables.
PWRLED
Attach the front panel power LED
cable to these two pins of the connector. The Power
LED indicates the system’s status. When the system is
powered on, the LED will be on.
Note: Some system cases may not have all four cables. Be sure to match the
name on the connectors to the corresponding pins.
PWRSW
Attach the power button cable
from the case to these two pins.
Pressing the power button on the
front panel turns the system on and
off rather than using the onboard
button.
HD_LED
Attach the hard disk drive indicator
LED cable to these two pins. The
HDD indicator LED indicates the
activity status of the hard disks.
RESET
Attach the Reset switch cable from
the front panel of the case to these
two pins.
Pin
Signal
HD_LED
1 HD_PWR
3 HD
Active
PWRLED
2 PWR
LED
4 STBY
LED
RESET
5 Ground
7 RST
BTN
PWRSW
6 PWR
BTN
8 Ground
No Connect
9 +5V
Empty
10 Empty
Summary of Contents for 132-SE-E775-KR
Page 1: ...User Guide EVGA X79 Motherboard...
Page 2: ...EVGA X79 Motherboard 2...
