EVGA 132-CK-NF78-A1 User Manual Download Page 49

Page: 49 / 127

780i 3-Way SLI Motherboard

EVGA

Base Memory

640K

Extended Memory

1047552K

Total Memory

1048576K

No Errors

ystem boot does not stop for any detected errors.

All, But Keyboard

System boot does not stop for keyboard errors, but does stop for all other
errors.

All, But Diskette

The system boot does not stop for a diskette error but will stop for all other
errors.

All, But Disk/Key

The system boot does not stop for a keyboard or disk error, but will stop for
all other errors.

Memory

These settings are

display-only values

that are determined by the BIOS POST

(Power-On Self Test).

Base Memory

BIOS POST determines the
amount of base (or conventional) memory installed in the system.

Extended Memory

BIOS determines how much extended memory is present during the POST.

Total Memory

This value represents the total memory of the system.

Summary of Contents for 132-CK-NF78-A1
































































































































Search results

Summary of Contents for 132-CK-NF78-A1

Reviews:

Related manuals for 132-CK-NF78-A1

Brands by name

Popular brands

EVGA 132-CK-NF78-A1, User Manual

Search results

Summary of Contents for 132-CK-NF78-A1

Reviews:

Related manuals for 132-CK-NF78-A1

Brands by name

Popular brands