STATUS SIGNALING
The EVSE can signal several statuses during, before or after the charging process.
In general, a green-lit LED means that everything is ok. An orange-lit LED means that charging is underway. And
flashing LED means that there is a problem of some sort. The number of flashes depends on the type of problem.
Green/orange LED flashing – charging speed can be a ected:
1x – problem with switching elements in the EVSE (rapid flashing)
2x – undervoltage or missing phases
3x – possible grid problems
4x – high temperature
Red LED flashing – charging will stop:
1x – problem with switching elements in the EVSE (rapid flashing)
2x – problem with the residual current device
3x – problem with the PE or neutral wire
4x – overvoltage
5x – very high temperature
6x – unsupported charging mode
All these statuses are also written on the device for easier identification of the problem.
PROBLEM-SOLVING
➢
If charging slows down or suddenly stops, check the onboard system in the vehicle and the display on the
charger for an error condition. Then follow the reported error.
➢
If charging has stopped, it may help to disconnect the portable charger from the car and the CEE socket
and reconnect it.
➢
If the problem is caused by the high temperature of the charger, stop charging until the charger cools
down. Check that the charger is not exposed to direct sunlight, and if so, place it in the shade. If
overheating occurs regularly, contact EV Expert s.r.o. or your dealer.
In case of persistent problems, contact EV Expert s.r.o. at: [email protected]
EV Expert s.r.o. |
| www.evexpert.eu
Strana
6
