www.cuiheat.com
126344-01A
16
Figure 17 - Installing Rear and Middle Logs
Rear Log
Burner
Pin for
Hole in
Bottom
of Log
Middle Log
Figure 18 - Installing Front Log
Front Log
Grate
INSTALLATION
Continued
INSTALLING LOGS
WARNING: Failure to position
the parts in accordance with these
diagrams or failure to use only
parts specifically approved with
this heater may result in property
damage or personal injury.
CAUTION: After installa-
tion and periodically thereafter,
check to ensure that no flame
comes in contact with any log.
With the heater set to HI, check
to see if flames contact any log. If
so, reposition logs according to
the log installation instructions
in this manual. Flames contact
-
ing logs will create soot.
Figure 19 - Installing Top Left, Log
Top Left Log
Flat
Recess
Flat Recess
It is very important to install these logs exactly
as instructed. Do not modify logs. Only use
logs supplied with heater.
1. Place rear log onto base. Holes in bottom
of log must seat over pins on base as
shown in Figure 17.
2. Place middle log onto base. Holes in bot-
tom of log must seat over pins on base
as shown in Figure 17.
3. Place front log onto grate as shown in
Figure 18. Front log has cut outs for the
fingers of the grate to fit into.
4. Place left top log as shown in Figure 19.
This log will fit on the matching flat recess
on the middle and rear logs.
5.
For 18'' log set.
Place center top log as
shown in Figure 20, page 17.
For 24'' and 30'' log set.
Place center top
log as shown in Figure 21, page 17. This
log will fit on the matching flat recess on
the middle and rear logs.
