PAGE 20
1
S E C T I O N 3
1. Prepare the Heating Film according to the process outlined in the
General Installation Instructions beginning on page #24.
2. Adhere the Heating Film to the slab or sub-floor using a moisture
resistant or water proofing indoor/outdoor flooring adhesive by rolling
back 1/2 a sheet at a time, using a 3/16”-1/4”(5-6mm) V-notch trowel
to apply adhesive to the floor, setting the Heating Film down onto the
adhesive. Using a roller, apply a continuous, even pressure with
overlapping strokes making a permanent bond between the sub-floor
and film.
3. Install the linoleum or vinyl flooring according to the manufacturer’s
specifications.
LINOLEUM AND VINYL INSTALLATION
SLAB
GLUE/ADHESIVE
FLOORING
THERMAL BARRIER (OPTIONAL)
HEATING FILM
JOIST 16” O.C. TYP.
PLYWOOD SUBFLOOR
GLUE/ADHESIVE
OR
NOTE: CHECK WITH THE FLOORING MANUFACTURER FOR MAXIMUM
TEMPERATURE RATINGS THAT ARE APPROPRIATE FOR YOUR FLOORING AND
SET THE THERMOSTAT ACCORDINGLY.
FLOOR SENSOR (INCLUDED WITH ALL THERMOSTATS)
MUST BE PROPERLY INSTALLED.
EverWarm
Radiant Floors
