IntelliGain
User Manual
IntelliGain
- 6
Revision 1.6
2.3.
SETTING THE LEVELER RELEASE MODE
IntelliGain Configuration
The
Leveler Release Mode
defines the maximum
integration time that is applied when loudness decreases
during a program period.
The actual integration time is content dependent. For more
responsive results set the release mode to a smaller value.
Leveler Release Mode
1
2
3
4
5
6
7
…
12
2.4.
SETTING THE COMPANDER ATTACK TIME
IntelliGain Configuration
The
Compander Attack Time
control defines how quickly
the compander reacts to an increase in the input loudness.
Compander Attack Time
10ms to 2000ms (2 seconds)
2.5.
SETTING THE COMPANDER RELEASE TIME
IntelliGain Configuration
The
Compander Release Time
control defines how quickly
the compander reacts to a decrease in the input loudness.
The compander release time should be larger than or equal
to the
Compander Attack Time
.
Compander Release Time
10ms to 2000ms (2 seconds)
2.6.
INPUT LOUDNESS MODE
IntelliGain Configuration
The
Input Loudness Mode
control defines the window that
will be used to produce the
Input Loudness
values in
section 3.2.1.
A
Momentary
selection defines a moving window of 400 ms.
A
Short Term
selection defines a moving window of 3 s.
Input Loudness Mode
Momentary
Short Term
2.7.
LOUDNESS AUTO REFRESH
IntelliGain Configuration
The
Loudness Auto Refresh
control allows the
Input
Loudness, Applied Gain
and
Output Loudness
values in
section 3.2 to refresh without enabling the
Auto Refresh
Mode
in VistaLINK
®
.
Loudness Auto Refresh
Off
On
2.8.
SETTING THE AUDIO SOURCE CHANNELS
IntelliGain Configuration
This control sets the channel mappings for the audio
program configuration. This audio configuration then feeds
the program configuration sources. For simplicity only
Channel 1 is shown.
Audio Source Select
Intelligain Source Select Channel 1
Channel 1 - 16
