HD9690 Series HDTV Graticule Generator Manual
FRONT PANEL
OPERATION
Revision 1.5
Page 3-27
3.10.1. Saving User Presets
To save the current object settings into one of the ten
user preset
memory locations, press the
PRESET SAVE
button. The Front panel display will show
Store Preset #
. Then press the
USER PRESET
button corresponding to the location you wish to store the settings to. The Front panel
display will show
SAVE to store n
where n is the number of the
user preset
. Press the
PRESET SAVE
button a second time to confirm the operation (The Front panel display will show
Preset n stored)
or press the
ESC
button to abort the store operation. If the user attempts to store a
preset into a write protected location the front panel will display the message
Preset n locked
.
User Presets cannot be deleted directly from memory they can only be overwritten
by another configuration saved to the same memory location
.
3.10.2. Recalling User Presets
To load the current object settings from one of the ten
user preset
memory locations; press
the
USER PRESET
button corresponding to the location you wish to restore the settings from.
Recalling one of the user presets will overwrite the current object settings and can
not be undone. Make sure you want to overwrite your current settings before you
recall one of the user presets
User presets cannot be recalled if the keyer is off.
3.10.3. Customizing the User Preset Names
The User presets can be uploaded to a computer text file using the Ethernet port. You can edit this text
file giving each of the presets a more ‘user friendly’ name, and then download the file back to the Graticule
generator. The names that you have assigned will be shown on the front panel when you recall the user
presets using the procedure in section 3.10.2. You can also download this user preset file to multiple
Graticule generators to pre configure them with your customized preset settings. See section 5.4 for
information on uploading and downloading user presets.
