HD9690 Series HDTV Graticule Generator Manual
Page 5-10
Revision 1.5
TECHNICAL DESCRIPTION
5.4.
UPLOADING AND DOWNLOADING THE USER PRESETS TO A COMPUTER
To download the user presets to a computer your will need to establish an FTP connection to the graticule
generator. First you will have to configure the IP addresses in the graticule generator for use on your
network as described in sections 5.3.1.1 and 5.3.1.2.
5.4.1. Downloading Preset Files from the Graticule Generator
To download a preset file from the graticule generator to the local directory
1. In the command prompt window type:
ftp xxx.xxx.xxx.xxx
(IP address of the module)
2. Press the <Enter> key when prompted for a “Username”.
3. Press the <Enter> key when prompted for a “Password”. A message indicating that you logged in is
displayed.
4. At the “
FTP>
” prompt type
quote
site
createfile
to create a text file in the Graticule generator that
contains the values for the ten user presets. The Graticule generator responds with
200
to indicate
successful creation of the file.
5. At the “
FTP>
” prompt type:
get presetfile.txt
to send the preset text file from the Graticule
generator to the computer. The file will be saved in the local directory on the computer.
During this time it is mandatory that all power cycles of the unit be avoided. The
figure below displays a successful FTP session.
6. At the “
FTP>
” prompt type
quit
to exit the FTP procedure. The Graticule generator responds with
221 Goodbye
