EQT-1616-3G-C-C
EQT 12G/3G/HD Router
Page 32
6.3.1. Product
Product Name:
This parameter displays the name of the device.
Serial Number:
This parameter displays the serial number of the device.
Revision:
This parameter displays the revision of the firmware.
Build:
This parameter displays the firmware version uploaded to the device.
6.3.2. Control Port
MAC Address:
This parameter displays the physical address of the device.
IP Address:
This field is used to set/display the IP address of the device.
Netmask:
This field is used to set/display the Subnet Mask of the device.
Gateway:
This field is used to set/display the Gateway of the device.
6.3.3. Serial
Serial Function:
This field is used to set/display the Serial Control function, whether it is ‘Front Panel’,
related to the front panel buttons (see details in Chapter 8, Levels section), or ‘Router Control’, related to
the serial connector (see details in Section 4.4.2).
NOTE:
The device must be rebooted in order for changes to take effect.
6.3.4. Genlock Control
Genlock Status:
This parameter displays the status of Genlock, whether it is ‘Locked’ or ‘Unlocked’.
Genlock Present:
This parameter displays whether the Reference is detected by the device, which could
be ‘Present’ or ‘Not Present’.
Genlock Standard:
This parameter displays the detected Reference standard, whether it is ‘NTSC’ or
‘PAL’.
6.3.5. Temperature
Temperature Sensor 1-4:
This parameter displays the temperature status of sensor 1-4, whether it is
green (normal), yellow (warning) or red (critical).
Temperature Crosspoint Sensor:
This parameter displays the temperature status of Crosspoint sensor,
whether it is green (normal), yellow (warning) or red (critical).
Temperature Zynq Sensor:
This parameter displays the temperature status of the Zynq sensor, whether
it is green (normal), yellow (warning) or red (critical).
6.3.6. PSU
Right:
This parameter displays the status of the right power supply, whether it is green (on) or red (off).
Left:
This parameter displays the status of the left power supply, whether it is green (on) or red (off).
Summary of Contents for EQT-1616-3G-C
