evertz CP-2116E User Manual Download Page 42

Page: 42 / 74

CP-2116E

Remote Control Panel

Page - 32

Revision 1.2

To import a device label, follow the instructions outlined below:

1. Select the

Browse

button and navigate to the appropriate .csv file and then select the

Open

button.

2. Once the file name is displayed in the field next to the

Browse

button, select the

Install

button.

The panel must be restarted when a file is imported. Click the

Restart Panel Software

button in the

top right hand corner.

5.3.4. VistaLINK

Alarm Server

This page enables the user to configure the

VistaLINK

Alarm Server

settings.

Figure 5-20: VistaLINK

Alarm Server

VistaLINK

Alarm Server:

This field enables the user to enter the

VistaLINK

Alarm Server

network address.

Port:

This field enables the user to enter the port number (the numerical input) to map to.

Select the

Save

button to save all settings.

Summary of Contents for CP-2116E











































































Search results

Summary of Contents for CP-2116E

Reviews:

Related manuals for CP-2116E

Brands by name

Popular brands

evertz CP-2116E, User Manual

Search results

Summary of Contents for CP-2116E

Reviews:

Related manuals for CP-2116E

Brands by name

Popular brands