evertz CP-2116E User Manual Download Page 40

Page: 40 / 74

CP-2116E

Remote Control Panel

Page - 30

Revision 1.2

5.3.1. Settings Page

The

Settings

page enables the user to lock the

Discovery

system and set the refresh rate of the

device.

Figure 5-17: Settings Page

Lock Discovery:

This parameter allows the user to enable or disable the

Lock Discovery

. If set to

, the

Discovery

system will not be permitted to add

new hardware devices to

the list of devices found. If set to

Off

, the

Discovery

system will be permitted to

add

new hardware devices to the list of devices found. Please note, when the

Discovery

system is set to

, hardware can be removed from the

Systems

page. It is recommended to leave the

Lock Discovery

setting to

Off

Auto-Refresh Rate:

This parameter allows the user to set the auto-refresh rate of the panel.
The minimum refresh rate is 5 seconds. To turn the auto-refresh feature off,
enter 0.

Select the

Save

button to save all

Discovery

settings.

Summary of Contents for CP-2116E











































































Search results

Summary of Contents for CP-2116E

Reviews:

Related manuals for CP-2116E

Brands by name

Popular brands

evertz CP-2116E, User Manual

Search results

Summary of Contents for CP-2116E

Reviews:

Related manuals for CP-2116E

Brands by name

Popular brands