evertz ATOM-USB REV03 User Manual Download Page 3

 

 

 

 - 3 of 15 -  

Contents Subject to Change 

 

 

 

av.evertz.com 

    Rev 03

 

Introduction 

Thank you for purchasing EvertzAV’s ATOM-USB multi-channel USB recorder. The ATOM-USB series of 
video recorders are based upon very high performance technology and built to high standards and 
together these factors combine to provide a very rugged and reliable video recording system. Before 
operating the unit, please read this manual thoroughly and retain it for future reference.  

This document is designed to give users an overview of the system as well as video recording operation 
details. Should you need any further information pertaining to installation or operation of your product or 
have any reliability issues, please contact EvertzAV or your supplier. 

Important Safety Information 

1.

 

Read all of these instructions. 

2.

 

Save these instructions for later use. 

3.

 

All warnings on the product and in the operating instructions should be adhered to. 

4.

 

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol 
cleaners. Use a damp cloth for cleaning. 

5.

 

This product is designed for indoor use only. Avoid using this product near water (e.g. near a 
bathtub, washbowl, sink, or laundry tub, in a wet basement, or near a swimming pool, etc…). 

6.

 

This product should be operated only from the type of power source indicated on the marking 
label. If you are not sure of the type of power supplied to your home, consult your supplier or 
EvertzAV. 

7.

 

This product is equipped with a 3-wire grounding type plug (a plug having a third [grounding] 
pin). This plug will only fit into a grounding-type power outlet. This is a safety feature. 

8.

 

For added protection, during a lightning storm or when it is left unattended and unused for long 
periods of time, unplug this product from the wall outlet and disconnect the cables. This will 
prevent damage to the product due to lightning and power-line surges. 

9.

 

Do not allow anything to rest on the power cord. Do not place this product where the cord could 
be exposed to damage by persons walking on it, or similar hazards. 

10.

 

Follow all warnings and instructions marked on the product. 

11.

 

Never push objects of any kind through the slots/ports of this product as they may touch 
dangerous voltage points or short out parts that could result in a fire or electric shock. 

12.

 

Never spill liquid of any kind on the product. 

Summary of Contents for ATOM-USB REV03

















Reviews: