evertz 9821EMR-AG-HUB, User Manual

Page: 16 / 58

9821EMR-AG-HUB
User Manual
Page - 4
Revision 0.1
2.3. SYSTEM WIRING
The unit can be wired based on the application; but in this section all possible connections will be
described.
2.3.1. Connections for the front of the unit
2.3.1.1. SFPs
These SFPs are used for TDM or MADI connections and the SFPs could be Fiber or Mini din.
Assuming Mini din SFPs are plugged into SFP cages in the document.
-
The letters at the top of each cage represent the following
o
(B) TDM/MADI input
o
(A) TDM/MADI output
- Number represents the TDM/MADI ports (1-10)
o SFPs 11-18 are for future use
- Connect TDM inputs (B) from 9821 to TDM output of ADMX
- Connect TDM outputs (A) from 9821 to TDM input of ADMX
There is no redundancy for TDM or MADI connection.
2.3.1.2. Q-SFPs
There are two Q-SFPs, top is the main and bottom is the backup. These SFPs are used for SDVN in-
band communication and AES67 or S302M routing.
For EXE or IPX wiring any version below 68 needs to follow the following wiring .
In QSFP, Links 1 and 2 are used for M302S and links 3-4 are used for AES67.