evertz 7890IXG User Manual Download

Page: 52 / 70

7890IXG

Internet Exchange Gateway

Page - 44

Revision 2.3

6.1.3. Configuration Management

Import Configure File:

This control allows the user to select and upload a JSON configuration file to card.

Export Configure File:

This control allows the user to save configuration data to a JSON file, and

download the JSON file to a local host.

Import Presets File:

This control allows the user to select and upload a preset file to the card.

Export Presets File:

This control allows the user to save configuration data to a preset file, and download

the preset file to a local host.

6.1.4. Control

Card Reset:

This control allows the user to reboot the card.

6.2.

IP INPUT

Figure

6-2 : VistaLINK® - IP Input

6.2.1. Access Port Control

IP Address:

This parameter allows the user to set the IP Address for the data port.

Netmask:

This parameter allows the user to set the netmask for the data port.

Gateway:

This parameter allows the user to set the gateway for the data port.

Summary of Contents for 7890IXG







































































Search results

Summary of Contents for 7890IXG

Reviews:

Related manuals for 7890IXG

Brands by name

Popular brands

evertz 7890IXG, User Manual

Search results

Summary of Contents for 7890IXG

Reviews:

Related manuals for 7890IXG

Brands by name

Popular brands