7882DM2-LB4-CA2-ASI Series
DVB-S/S2/S2X Satellite Demodulator
Page - 6
Revision 1.0
2.4.
HTTP BROWSER CONTROL
The user can control the 7882DM2-LB4-CA2-ASI using an HTTP browser by following these steps:
1. Connect a network cable (RJ-45) between the management connector labelled “ETHERNET” on
the chassis and the LAN connector of the local PC or switch.
2. Open Firefox or Chrome browser (latest version recommended) and type in the Control Port IP
Address from Section
NOTE: The PC used for management and administrative purposes must be in the
same subnet to establish proper connection to the chassis. User may need to change
the user’s PC IP settings for DHCP to static during the management IP connection.
3. Log in as user:
root
password:
evertz
NOTE: The default username and password is “root” and “evertz” respectively. This
is for read/write privileges.
For read only privileges, the customer needs to access with username and password
“customer” and “customer” respectively.
4. The user will be directed to the Frame Controller (FC) Menu as shown in Figure
2-5. To access
the 7882DM2-LB4-CA2-ASI (slot 3 in this example) web controls, click on the link under the
Name column in the Products section.
Figure
2-5 : WebEASY
®
- FC Menu
