7882DM2-LB4-CA2-ASI Series
Satellite DVB-S/S2/S2X Demodulator
Revision 1.0
Page - 35
Figure
6-4 : VistaLINK
®
PRO - Upgrade Complete
After the firmware has been transmitted to the 7882DM2-LB4-CA2-ASI module successfully, the
module will reboot to complete the firmware upgrade process. Close the
Upgrade Firmware
window
and
Version Information
window.
Once the cards have rebooted, ensure all 7882DM2-LB4-CA2-ASI modules are still present in the
VistaLINK
®
PRO
hardware tree.
Right
click on 7800FR frame that contains the
7882DM2-LB4-CA2-ASI modules, and select
Version Information
. Navigate the hardware tree on the
left side of the version information window to select the 7882DM2-LB4-CA2-ASI module listed. The list
on the right side of the window should populate with all 7882DM2-LB4-CA2-ASI modules present in the
7800FR. Verify that all modules that have been upgraded are now reporting the expected firmware
version.
NOTE: If any of the 7882DM2-LB4-CA2-ASI modules do not properly upgrade the
firmware, please power-cycle those boards and retry the procedure exclusively on
the failed boards. If the issue still persists, contact Evertz for further assistance.
6.1.2. Firmware Upgrade Using WebEASY
®
Select the Upgrade tab at the top of the general page (Figure
Figure
6-5 : WebEASY
®
- Selecting Upgrade
Browse for the latest version of firmware to update with and select the Upgrade button.
