7780M4-ASI / 7780D4-ASI
Quad ASI TDM-Mux/Demux
Page 10
Revision 1.0
6.
CARD CONFIGURATION – 7780M4-ASI
6.1.
CONFIGURING THE 7780M4-ASI USING VISTALINK
®
Expand the Hardware tree from the VLPro window. Locate the IP address of the frame controller in
which the card(s) has been installed. Click the “+” button to expand the frame. The card you have
installed should be displayed as a sub component of this frame, and should be named appropriately,
7780M4-ASI, followed by square brackets to indicate the slot number used.
6.2.
ASI IN 1/2/3/4 TABS
Right-click the card and select
View Configuration
from the context sensitive menu. You will be
presented first with the “ASI IN 1” tab. The following three tabs labeled ASI IN 2 / ASI IN 3 / ASI IN 4
have identical controls and layout but refer to each of the separate inputs. For the sake of brevity, only
ASI IN 1 will be described.
The configuration screen shown in Figure 6-1 will appear on the right-hand side of the screen:
Figure 6-1: ASI IN 1 – 7780M4-ASI
