7700 Multi-Frame Manual
7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter
Revision
1.1
Page-3
2. INSTALLATION
The 7707EO-3G comes with a companion rear plate that has three BNC connectors and one SC/PC
(shown), ST/PC or FC/PC optical connector. For information on mounting the rear plate and inserting the
module into the frame see section 3 of the 7700FR chapter.
7707EO- 3G
3G/HD/SDI
INPUT
FIBER
OUTPUT
GPO
3G/HD/SDI
OUTPUT
Figure 2-1: 7707EO-3G Rear Panel
2.1.
ELECTRICAL SIGNAL CONNECTIONS
3G/HD/SDI INPUT:
Input BNC connector for 10-bit serial digital video signals compatible with SMPTE
424M, SMPTE 292M, SMPTE 259M-C, SMPTE 305M, and DVB-ASI. This input
provides adaptive compensation for up to 70m of industry standard Belden
1694A cable at rates to 2.970Gb/s, 100m at 1.485Gb/s, and 250m at 270Mb/s.
3G/HD/SDI OUTPUT:
There are two BNC connectors with serial component video outputs, compatible
with SMPTE 424M, SMPTE 292M, SMPTE 259M-C, SMPTE 305M, and DVB-
ASI. Reclocking is provided or may be disabled by the user in Non-Reclock
mode.
