7700 Multi-Frame Manual
7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter
Page-2
Revision
1.1
Features:
•
Supports all SMPTE 424M standards at 2.970Gb/s
•
Supports all SMPTE 292M standards at 1.485Gb/s
•
Supports all SMPTE 259M-C standards at 270Mb/s
•
Supports DVB-ASI (270Mb/s), and SMPTE 305M (SDTi) rates
•
Auto rate selection, indication and reclocking for all SDI, HD-SDI, 3G-SDI data rates from 270Mb/s
to 2.970Gb/s
•
Selectable non-reclock mode for other data rates
•
Detection and display video format rate
•
User enabled GPO configurable to normally open or normally closed
•
Automatic coaxial input equalization to 70m at 2.97Gb/s, 100m at 1.485Gb/s, and 250m at
270Mb/s (Belden 1694A)
•
Optical Output wavelength of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T
G.694.2 compliant)
•
DWDM wavelengths (ITU-T G.694.1 compliant) also available
•
Supports single-mode and multi-mode fiber optic cable
•
Fully hot-swappable from front of frame
•
Comprehensive signal and card status monitoring via four digit card edge display or remotely
through SNMP and VistaLINK
®
•
Can be housed in either a 1RU frame which will hold up to 3 modules, a 3RU frame which will hold
up to 15 modules, 3RU portable frame that holds up to 7 modules or a standalone frame which will
hold 1 module
•
VistaLINK
®
capability is available when modules are used with the 3RU 7700FR-C or 350FR
portable frame and a 7700FC VistaLINK
®
Frame Controller module in slot 1 of the frame
ADAPTIVE
EQUALIZATION
RECLOCKING
SMPTE 424M
SMPTE 292M
SMPTE 259M-C
SMPTE 305M
DVB-ASI
CONTROL/
INDICATION
VistaLINK
®
Interface
LOCAL
CONTROL
LOCAL
INDICATION
SERIAL
INPUT
OPTICAL
OUTPUT
SERIAL
OUTPUT
OPTICAL
DRIVER
SERIAL
OUTPUT
CABLE
DRIVERS
GPO
Figure 1-1: 7707EO-3G Block Diagram
