7700 MultiFrame Manual
7707BPX Optical Bypass
Protection
Switch
Page-18
Revision
1.6
7.2.
V
ISTA
LINK
®
MONITORED PARAMETERS
The following parameters can be remotely monitored through the
Vista
LINK
®
interface:
Parameter Description
Active input
Indicates whether input A or B is the active input.
Input A Optical Power
A range of values describing received optical power at the fiber
input A.
Input B Optical Power
A range of values describing received optical power at the fiber
input B.
Input A Status
Input A status is the active input.
Input B Status
Input B status is the active input.
Master Jumper
Indicates the position of Master Jumper.
Optical Threshold A
Indicates the set value of the Input A optical threshold.
Optical Threshold B
Indicates the set value of the Input A optical threshold.
Auto Switchback Mode
Indicates if the Auto Switchback Mode is on or off.
Auto/Manual Mode
Indicates if the card is in Auto Mode or if in Manual Mode what
channel is active.
GPI1 State
Indicates the state of the GPI1 input.
GPI2 State
Indicates the state of the GPI2 input.
Dual GPI Mode
Indicates if Dual GPI Mode is on or off.
GPI Active State
Indicates if GPI Active State is Low or High.
Table 7-1: VistaLINK
®
Monitored Parameters
7.3.
V
ISTA
LINK
®
CONTROLLED PARAMETERS
The following parameter can be remotely controlled through the
Vista
LINK
®
interface:
Parameter Description
Auto/Manual Mode
Indicates if the card is in Auto Mode or if in Manual Mode what
channel is active (
only in Remote Mode
).
Optical Threshold A
Indicates the set value of the Input A optical threshold (
in both
Local and Remote Modes
).
Optical Threshold B
Indicates the set value of the Input B optical threshold (
in both
Local and Remote Modes
).
Table 7-2: VistaLINK
®
Controlled Parameters
