570J2K-HW-X19
Multi channel J2K Encoder-Decoder
Page - 44
Revision 1.0
6.8.1. Input Stream
Stream Type:
This parameter displays the type of input stream which could be multicast or unicast.
Protocol Status:
This parameter reflects the input protocol. It will reflect unknown, UDP or RTP.
AES Encryption Detected:
This parameter displays if the stream has AES Encryption or not.
Received Ethernet Bandwidth:
This parameter displays received Ethernet Bandwidth for each input
stream.
6.8.2. Input Stream Internal Decoder Core
Received Total TS Bitrate:
This monitor reflects the total bit rate received for the specified multicast
stream, unit is kbps.
Received NULL Packet Bitrate:
This monitor shows total NULL packet bitrate for multicast stream
specified.
Number of PID in TS:
This monitor shows the total number of PIDs in the TS.
Loss Sync Count:
This monitor shows the total count of sync loss.
CC Error Count:
This monitor shows the total count of continuity counter (CC) error.
PCR Locked:
This monitor shows if the input is locked on the program clock reference (PCR).
Clear Input Stream Status:
This control allows the user to reset the Ethernet monitoring status.
6.8.3. Input IP Packet Monitor
IP packet Drop Count:
This parameter displays the total count of sync loss.
IP Packet Bit Rate:
This parameter displays the IP Packet Bit rate.