1200DD Series Digital Data Display Manual
1200DD - 3-18
Revision 1.8
3.4.12.5. Setting the Internet Gateway Address
IC
With this menu item, you can set the IP gateway address used for static
networks.
See section 3.4.12.2 for IP setting instructions. The default is 0.0.0.0
IG
xxx.yyy.zzz.aaa
3.4.12.6. Showing the Internet Address In Use
IC
With this menu item, you can see the IP address used by the 1200DD for
static or dynamic networks.
In dynamic networks, the server allocating addresses will determine the IP
in use. This shows address in use if DHCP is selected, and the Internet
Address set above if static is selected.
The display will walk through the 4 octets of IP address in a similar method
to the setting of IP’s, but the
ITEM
and
SELECT
buttons will have no effect.
IU
xxx.yyy.zzz.aaa
3.4.12.7. Selecting the NTP IP server
IC
With this menu item, you can select the server that the NA instruction
affects. There are 8 server addresses that can be used.
If the server address indicated by menu item this is set, then there will be
an “I” before the number. For example if server 1 and 3 have their IP
addresses set, as this item is scrolled through, it would show:
“i1”
“ 2”
“i3”
“ 4”
“ 5”
“ 6”
“ 7”
“ 8”
NS
1
2
..
8
3.4.12.8. Setting the Server Internet Address
IC
With this menu item, you can set the IP address used by the NTP lock. Up
to 8 IP addresses that can be set. First select the address you want to
enter using the NS menu item.
See section 3.4.12.2 for IP setting instructions. The default is 0.0.0.0
When the address is entered, you will be returned to the NS menu above
to facilitate entering multiple servers.
NA
xxx.yyy.zzz.aaa