Eversys LEGACY L'2c/Classic, User Manual

Page: 107 / 164

Num-
ber Mod-
ule /
Unit Info Mes-
sage Explanations / Rem-
edies
S-012 Bean
hopper Bean hopper is
empty or
closed.
Please refill or
open the bean
hopper.
The brewing module has detec-
ted no coffee powder in the
chamber.
The bean hopper has to be re-
filled or open [54]
.
- -
S-013 Grinder
module Coffee quantity
too high (last
product). Too much powder coffee was
used. Use less coffee next time.
Contact service organisation.
-
S-014 Display /
Touch
screen Rinse necessa-
ry.
The coffee boil-
er isn't allowed
to heat before
the machine is
rinsed.
Press the rinse key in the upper
right corner [51]
.
Press the rinse key in the upper
right corner.
- -
S-015 Cleaning
balls dis-
penser Check cleaning
ball dispenser:
• Blocked or
broken clean-
ing balls?
• Light barrier
dirty?
The machine has been cleaned
10x without a cleaning ball!
Check if a cleaning ball is
blocked or broken.
Contact service organisation.
This stop message can only
occur if you have set the pa-
rameter
If cleaned without
detergent to Block after 4
days .
The coffee machine is blocked
now until the next cleaning
with cleaning balls!
-
S-016 Cleaning
balls dis-
penser The coffee ma-
chine has been
cleaned with-
out cleaning
balls.
• Cleaning ball
dispenser
empty?
• Blocked or
broken clean-
ing balls?
Machine blocked!
Contact service organisation.
This stop message can only
occur if you have set the pa-
rameter
If cleaned without
detergent to Block after 4
days .
The coffee machine is blocked
now until the next cleaning
with cleaning balls!
-
S-017 Display /
Touch
screen Cleaning neces-
sary.
Please press
Continue to
start the clean-
ing.
Press and hold the rinse key for
five seconds to start the clean-
ing. -
Troubleshooting
Page 107 of 161 Published on 29.06.2022 Legacy User Manual © Eversys S.A.