background image

                                                                                            Copyright 

Ž

 1997

    

ˇ

 SPECIFICATION (

電氣規格

)

    

  Model Number 

HA51 (FCC)

   *1. Adaptor Spec. 

DC 15V / 300mA

    2. Standy Current 

60mA Max.

    3. Operating Current 

110mA Typ. 120mA Max. (Expect External Load)

    4. External Output Power (POWER+) 

12.8 

±

 1 V / 100mA Max.

    5. Alarm Auto-Stop Time 

3 Min. 

±

30 Sec. / 10 Min. 

±

 1 Min. (selectable)

    6. Alarm Volume 

95 dB Min. (The front of 1M)

    7. Battery Voltage 

14 

±

 1 VDC (Except 12V 1.2AH Battery & External Output)

    8. Exit/Entry Time 

15 

±

 3 Sec.

   *9. P+ Voltage 

12.8 

±

 1V/250mA (Add 12V/1.2AH Rechargeable Battery).

    Option:
    1. Adaptor Spec.

DC 16V / 600mA.

    2. Backup Battery Spec. 

DC 12V 1.2AH Rechargeable battery.

    3. ANTI Jamming act time 

30 

±

 15 Sec. (Add ANTI Jamming module).

   *4. P+ Voltage 

12.8 

±

 1V/500mA (Add 12V/1.2AH Rechargeable Battery).

    5. Alarm Auto-stop Time

  3 Min.

10 Min. (2 step selectable).

    6. Receiver Frequency

 433MHz

    7. Receiver Range

70M Min. (For free space which is transmitted by HA51M or HA51P),

  60M Min. (For free space which is transmitted by HA51R).
                  (Old Version 70M For HA51R)

    8. External

Output for Auto Dialer (S126 for N.C. use only).

    9. External

Output for Alarm System

       (S105

S125

HA52E when connect with HA52E

the function off tamper return is non-exist).

 10. ANTI-JAMMING module for Option.
*11. Receive RF Signal have ARM

DISARM

PANIC

INSTANT

PARM

DELAY.

 12. After Console is powered on

press HA51R "DISARM" key to memorize HA51R " HOUSE CODE

".
 13. Adjustable-Code is adapted on Console to HA51M and HA51P.

    The " House Code" must be same as the HA51R.

 14.12V 1.2Ah Rechargeable Battery is necessary when use the extended siren (S105

S125

HA52E).

 15.When the HA52E is extended, DC Adaptor must use 16V/600mA Spec. and the HA51 unit must

use OPTION version.

   

  Model Number: HA51M (FCC)

  1.Operating Voltage

12 V DC ALKALINE BATTERY

   2.Standby Current

3uA (TYP.) , 6uA (MAX.)

   3.Operating Current

8mA Max.

   4.Frequency

433.92MHz   

±

 150KHz

   5.Operating Temperature 

-10

 

 40

   6.Duty Cycle: < 35%

7.Antenna Type: PCB layout

Summary of Contents for HA 51










Reviews: