11
DVD Remote
Controller
DVD remote controller. Release both buttons,
is flashing, which implies that the unit is ready for
learning next button and resumes 30 seconds
countdown.
4. If learning fails,
will be shown.
Note:
If button pressing is too long during learning
process, IR signal will be repeated when using the
unit to control DVD (e.g. press button 2 on the unit,
the DVD received 22).
5. To learn next button, repeat step 1-4.
6. Upon completion, press
to save and exit
learning mode.
Note:
The unit cannot replace all the functions of
DVD remote controller.
6-2 DVD Mode Operating Instructions
1. Press the button next to
twice
to switch the unit
from RF mode to DVD mode,
is on.
2. Press a learned button (
,
,
,
,
,
~
,
,
or
) on the unit to control DVD.
7-1 Power Setting Mode
1. Press the button next to
three times to switch
the unit from RF mode to power setting mode.
flashing implies that the unit is in power
setting mode.
Note:
Normal power mode is default setting.
2. Press
to set the unit in normal power mode
; while pressing
for power saving mode
.
3. Wait 30 seconds to return to RF mode
automatically or alternatively press
to exit power
setting mode.
SPECIFICATIONS
Battery Type
1.5V AAA alkaline battery x 4 pieces
Battery Life
About 12 months, @25
¢
C standby mode
Operating
Frequency
868.30MHz or 923.00MHz
*
Specifications are subject to change without prior notice.
A501111256R
Operation Reference
Normal operation
Type of Product
Operation
Command
Action of Device
Remote on
On
On/Off Module
Remote off
Off
Remote on
On
Remote off
Off
Dimmer level up
Upgrade one degree of brightness
(Only applicable for lamp module at ON status)
Lamp Module
Dimmer level down
Reduce one degree of brightness
(Only applicable for lamp module at ON status)
Within 5cm in
line of sight
AC124