background image

ARIENS COMPANY

GRAVELY

®

 | STENS

®

 | LOCKE

®

 | NATIONAL

®

 | BYNORM

®

 | EVERRIDE

®

 | GREAT DANE

®

 

EverRide_Com_2008

30 of 31

Ariens Company (Ariens) warrants to the original purchaser that EverRide

®

 brand products manufactured by Ariens, 

designated or labeled commercial products by Ariens, and sold after December 31, 2007 will be free from defects in material 
and workmanship for a period of two years after the date of purchase or 1000 hours of use, whichever comes first. An 
authorized EverRide dealer will repair any defect in material or workmanship, and repair or replace any defective part, subject 
to the conditions, limitations and exclusions set forth herein. Such repair or replacement will be free of charge to the original 
purchaser (labor and parts), except as noted below.

Limited Lifetime Warranty on Mower Deck Shell

The deck shell is warranted to the original purchaser against any defect in material or workmanship for as long as the 
original purchaser owns the product. Any defect in material or workmanship of the deck shell will be repaired free of 
charge (parts and labor) to the original purchaser for two years or 1000 hours of use, whichever comes first. After two 
years or 1000 hours of use, the parts required to repair a defect in material or workmanship of the deck shell, not the 
labor, will be provided free of charge for as long as the original purchaser owns the product. 

Limited Lifetime Warranty on Main Frame

The main frame is warranted to the original purchaser against any defect in material or workmanship for as long as the 
original purchaser owns the product. Any defect in material or workmanship of the main frame will be repaired free of 
charge (parts and labor) to the original purchaser for two years or 1000 hours of use, whichever comes first. After two 
years or 1000 hours of use, the parts required to repair a defect in material or workmanship of the main frame, not the 
labor, will be provided free of charge for as long as the original purchaser owns the product.

Three-Year Limited Warranty on Deck Spindles

Mower deck spindles are warranted to the original purchaser for three years from the date of purchase. Any defect in 
material or workmanship of the mower deck spindles will be repaired free of charge (parts and labor) to the original pur-
chaser for two years after the date of purchase. After two years, the parts required to repair a defect in material or work-
manship of the deck spindles, not the labor, will be provided free of charge.

One-Year Limited Warranty on 21-inch Walk-Behind Lawn Mowers

21-inch walk-behind lawn mowers labeled or designated by Ariens as a Professional/Commercial product put to any busi-
ness use, agricultural, commercial, or industrial, are warranted to the original purchaser to be free from defects in mate-
rial and workmanship for a period of one year after the date of purchase. 

90-Day Limited Warranty on Service Parts and Accessories

Genuine EverRide brand service parts and accessories are warranted to be free from defects in material and workman-
ship for a period of 90 days after the date of purchase. An authorized EverRide dealer will repair or replace any such part 
or accessory free of charge, except for labor, during that period.

If any product is rented or leased, then the duration of these warranties shall be 90 days after the date of purchase.

Exceptions, Limitations, Exclusions

Customer Responsibilities
Register the product immediately at the time of sale.
 If the dealer does not register the product, the customer must 
complete the product registration card in the literature package and return it to the Ariens Company, or register the unit online 
at www.ariens.com.

To obtain warranty service, the original purchaser must:

• Perform the maintenance and minor adjustments explained in the owner’s manual.

• Promptly notify Ariens or an authorized EverRide service representative of the need for warranty service.

• Transport the product to and from the place of warranty service.

• Have the warranty service performed by an authorized EverRide service representative.

Two-Year Limited EverRide

®

 

Warranty

Summary of Contents for 988410

































Reviews: