7700 MultiFrame Manual
7700ADA7 Analog Video Distribution Amplifier
Revision 1.2.2
7700ADA7 - 3
3.
SPECIFICATIONS
Note:
At the time of printing, this product has only been qualified for use with standard definition signals.
It, however, has been designed to work with high definition signals. Frequency and phase response will not
be optimized at the upper frequency range of high definition video bandwidths.
All specifications, unless indicated, measured under the following conditions:
•
1 Vp-p video applied
•
75 Ohm card input terminated
•
AC coupled
•
Gain adjusted for unity operation into 75 Ohm load
3.1.
ANALOG VIDEO INPUT
Standards:
Any analog video format, up to 2Vp-p and 30MHz bandwidth
Connector:
BNC per IEC 61169-8 Annex A
Common Mode Range:
>6Vp-p
CMRR:
> 70dB to 1kHz
Signal Amplitude:
2.5Vp-p max
Impedance:
75Ohms terminated, 35kOhms Hi-Z (jumper selectable)
Coupling:
AC or DC (jumper selectable)
Return Loss:
>40dB to 10MHz, >30dB to 30MHz
3.2.
ANALOG VIDEO OUTPUTS
Number of Outputs:
7 Per Card
Connector:
BNC per IEC 61169-8 Annex A
Output Impedance:
75 Ohm
Gain Control Range:
+/- 5dB
DC level (DC Coupling active)
< +/- 100mV
Freq. Response:
<+/-0.05dB (to 5.5MHz)
Differential Gain:
<0.17 %
Differential Phase:
< 0.19 deg
C/L Gain Inequality:
<+/-0.1%
C/L Delay:
<+/-2nsec
Output Isolation:
42dB to 10MHz, 32 dB to 30MHz
Output Return Loss:
>40dB to 30MHz
Noise Performance:
<-78dB RMS NTC7 weighting,
<-70dB RMS 15kHz to 5.5MHz
3.3.
ELECTRICAL
Voltage:
+ 12VDC
Power:
4.6 Watts
3.4.
PHYSICAL
Number of Slots:
1