7700 MultiFrame Manual
7700ADA7 Analog Video Distribution Amplifier
7700ADA7 - 2
Revision 1.2.2
2.
INSTALLATION
The 7700ADA7 comes with a companion rear plate that has 8 BNC connectors. For information on
mounting the rear plate and inserting the module into the frame see section 3 of the 7700FR chapter.
Figure 2-1: 7700ADA7 Rear Panel
ANLG IN:
Input (isolated) BNC connector for analog video signals. The TERM jumper located on
the module near the back determines whether the input signal will be high impedance or
terminated with 75 ohms. (See section 6.2) The INPUT jumper located on the module
near the back determines whether the input signal will be AC or DC coupled. (See
section 6.3)
ANALOG OUT:
There are seven BNC connectors with level adjusted copies of the input signal.