manualshive.com logo in svg

Everlasting BAKING CAB FB 100, Use And Maintenance Manual, Page: 36 / 56

Share
Download
Everlasting BAKING CAB FB 100 Use And Maintenance Manual Download Page 36

35

ENGLISH

 10.11 Detailed description of the icons relative to the Controllers Status 

During the implementation of a cycle (either Manual or Automatic) the status of the main controllers 

shall be displayed by means of icons.

► 

 White ON : compressor is activated

►

 Yellow ON: compressor activation is required 

►

 OFF : compressor is not active  

► 

ON : heating is activated 

►

 OFF: heating is not active  

► 

ON : humidification is activated 

►

 OFF : humidification is not active  

► 

ON : dehumidification is activated 

►

 OFF : dehumidificazione is not active 

  Buzzer silencing

Press and release any key when the buzzer is sounding. 

  Alarms

When an alarm signal occurs a pop-up window opens stating the current alarm code. The buzzer 

sounds in an intermittent manner until you press any key silencing the buzzer and making the pop-

up window disappear.  

The icon indicating the current alarm is still present on the screen 

Summary of Contents for BAKING CAB FB 100

























































Reviews:

No comments