Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. © 2014
15
COMPUTER OPERATION
STEP 1: POWER ON
Pedaling or press any button.
STEP 2: SELECT PROGRAM
Press the
“▲ / ▼” buttons until the desired program is displayed.
STEP 3: SET THE PROGRAM TIME (AND INPUT AGE FOR HEART RATE CONTROL
PROGRAMS)
Press the
SET
button, the
TIME
function mode will appear with the display
flashing
“0:00”.
Press the SET button again to pass setting the program time.
Or use the
“▲ / ▼” buttons to set the program time, from 5 minutes up to 99
minutes with 1 minute increments. Press the SET button to confirm the
setting. Press the
START/STOP
button to start the program.
When you select the Heart Rate Control Programs, P11 to P12, you must
input your age. Press the SET button until the
AGE/TARGET H.R.
display is
flashing and uses the
“▲ / ▼” buttons to input your age.
Press the SET button to confirm the setting. Press the
START / STOP
button
to start the program.
NOTE
:
1. The program will not start until you press the START / STOP button
2. If you
don’t set the program time, the computer will count up from one second up to
99:59 Minutes, and use the default workout time, 30 minutes, to cycle run the program
profile.
3. The computer will count down from the program time that you set. When the timer counts
down to zero, the computer will alert you with an audible alarm that your workout is
complete. You can press any button to stop the audible alarm.
OPERATION DESCRIPTIONS
1.
To stop a running program, press the
START / STOP
button. In this mode, you can press the
START /
STOP
button again to continue to run the current program. Or, you can use the
“▲ / ▼” buttons to select a
new program. The function values of
DISTANCE
and
CALORIE
will continue to accumulate.
2.
When you complete a program, press the
START / STOP
button to stop the program. You can use the
“▲ / ▼” buttons to select a new program. The function values of
DISTANCE
and
CALORIE
will continue
to accumulate. This will allow you to run several programs and still know the total
DISTANCE
and
CALORIE
during the workout.
3.
If you want to restart with a new program, press the
RESET
button to reset all of the function values to
zero. Use the
“▲ / ▼” buttons to select a new program.
4.
The computer will shut off automatically after 4 minutes of inactivity, and the function values,
DISTANCE
and
CALORIE
, will be kept.
POWER SOURCE:
The computer uses the
ADAPTER (76)
as a power source. Use the EVERLAST UPRIGHT BIKE with the
adapter plugged into an electrical outlet.
