Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. © 2014
10
STEP 6 ATTACH COMPUTER
1.
Remove four flat cross head screws (9) from the back of the computer (8).
2.
Connect the middle section system cable (10) to the cable at the back of the
computer (8).
3.
Attach the computer (8) to the top of the computer bracket of the upright (12) and secure
with four flat cross head screws (9).
4. Insert the plug of the hand pulse wire (6) to the socket of the hand pulse wire located at
the back of the computer (8).
5. Insert the audio cable (50) to the the MP3 socket of the computer (8).
NOTE
:
To avoid pinching the wires, insert the wires into the opening at the top of the
handle bar post.
STEP 7 ATTACH PEDAL & STRAPS
1.
Attach the right and left pedal straps (26R/L) to the right and left pedals (27R/L).
NOTE:
The end with four adjustable holes must be set outwards. You can choose the
desired hole for your shoe size.
2.
Attach the right pedal with straps set (26R/27R) to the right side of the crank arm (31).
Do the same procedure, for the left pedal with straps (26L/27L) and the left side of the
crank arm (31) assembly.
NOTE:
The pedals and crank arms are marked with R & L. The right pedal (R) should
be threaded on clockwise and the left pedal (L) should be threaded counter-
clockwise
