Customer Service 1-888-707-1880
Or email [email protected] 8 Dyaco Canada Inc.©2019
ASSEMBLY INSTRUCTION
This manual is designed to help you easily assemble, adjust and use this machine.
Please read this manual carefully. For the sake of familiarizing yourself with the
parts identified in the instruction, first study the overview drawing.
Set all parts in a clear area on the floor and remove the packing material. Refer to
the parts list for help to identify the parts.
It will take two people to assemble your unit.
ENSURE THAT ALL NUTS AND BOLTS ARE FIRMLY TIGHTENED AFTER
EACH STEP
STEP 1
1. Pull out the lock pin (09) from the front support tube (01) and adjust the front
support tube (01) to the correct position then insert lock pin (09) to tighten the
front support tube (01).
2. Remove 2 curved washers (07) and 2 domed nuts (08) in the front stabilizer tube
(05).Attach the front stabilizer tube (05) to the front support tube (01), tighten
with 2 curved washers (07) and 2 domed nuts (08).
3. Repeat the procedure for rear stabilizer tube (06).
Hardware Step1
Pre-assembled on Main Frame:
1 Lock pin (#09)
Pre-assembled on Front & Rear Stabilizer:
4 Curved washers (#07)
4 Domed nuts (#08)
