Service
serviced by an authorized
Service Center, and only
genuine spare parts must
be used.
1)If the appliance is Frost
Free.
2)If the appliance contains
freezer compartment.
Any electrical work required
This product must be
to do the servicing of the
appliance should be carried
out by qualified electrician
or competent person.
Sufficient air must be allowed to circulate
in the lower rear section of appliances, as
poor air circulation can affect perfor-
mance.
Appliances must not be exposed to rain.
Sufficient air must be allowed to circulate in
the low rear section of the appliance, as
poor air circulation can affect performance.
Built-in appliances should be positioned
away from heat sources such as heaters
and direct sunlight.
5
Important!
For this reason,
space should be
available around the
. It is
advisable for there to be 75mm separating
the back of the
to the wall at
least 100mm of space on its two
of over 100mm from its top and a
clear space in front to allow the doors to
open 180°.
It is necessary to have good
ventilation around the refrigerator to allow for
the dissipation of heat, high efficiency, and
low power consumption.
sufficiently cleared
refrigerator
refrigerator
sides, a
height
First use and Installation
Cleaning before use
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand new product, then
dry thoroughly.
Important!
Do not use detergents or
abrasive powders, as these will damage the
finish.
Installation Positioning
Warning!
Before installing, read the
instruction carefully for your safety
and correct operation of the appliance.
Position the appliance away from sources
of heat such as stoves, radiators, direct
sunlight etc.
Maximum performance and safety are
guaranteed by maintaining the correct
indoor temperature for the class of unit
concerned, as specified on the rating
plate.
75mm
100mm
100mm
7