6
|
Reversing the door
Warning: The appliance must always be disconnected from the power supply when changing the direction the
doors open.
CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you
during the door reversal process.
1.
To access the lower hinge assembly, tilt back the refrigerator cabinet or lay the refrigerator on its back.
2.
Remove both legs located at the front of the cabinet; adjustable leg on hinge side, fixed leg on opposite side (Fig.A)
3.
Remove the screws holding the lower hinge assembly to the cabinet. (Fig.A)
4.
Remove the main door assembly from the refrigerator cabinet (open door and pull down).
5.
Remove the screws from the middle hinge assembly.
Then remove the hinge and freezer door.
And turn the middle beam over 180°.
6.
Remove the top hinge pin. (Fig.C)
7.
Re-install the top hinge pin on the opposite side of the cabinet.( Fig.C)
8.
Remove the door plugs and door bushings located on the top and bottom of each door assembly.
9.
Interchange positions of plugs and bushings on both doors. (ie.door plug right side, door bushing left side.)
10.
Re-install freezer door assembly on cabinet.
Summary of Contents for EVTD301
Page 1: ...EVTD301...