Quick Reference
Network Settings Connected through a Router
1.
Gather the following from the
ISP
:
Static IP address
,
Subnet mask
,
Gateway IP
.
2.
Plug in the network cable into the network port in the
EDR1600
.
3.
Enter the menu screen by pressing the config button.
4.
Then enter the system menu and go to IP Configuration Table.
5.
Enter the
IP Address
specifically assigned for the
EDR1600
on your
network. (
NOTE:
IP Address is assigned by router)
6.
Enter the
Subnet Mask Address
assigned to your network.
7.
Enter the
Gateway Address
assigned to your network.
8.
Exit the Menu by clicking ok and
Reboot
the
EDR1600
by powering
it down and back up.
(
NOTE:
Please be sure that ports 80, 1111,and 1600 are open. To open
any of the following ports please enter the port-forwarding portion of your
router and open these ports within that page.)
6
