EHN7221/7260/7360
6
2.
Screw the Base Plate to the Wiring Box using the supplied four
Phillips Screw.
Base Plate
Wiring Box
If you want to
wire the cables through the
bottom of the Camera Case
, follow the steps below:
a.
Remove the Circle Plate on the bottom of the Camera Case. You can simply loosen the Circle
Plate using a coin.
Circle Plate
Camera Case
b.
Loosen and remove the Cable Gland from the Camera Case. Screw the Cable Gland to the
hole on the bottom of the Camera Case.
Cable Gland
Camera Case
