EverFocus Paragon 264 Series Instruction Manual Download Page 95

Page: 95 / 134

5.10.5

Misc.

Figure 5-40 System Menu – Firmware & Misc.

Firmware
Current Firmware Version:

Displays the current version.

Firmware Upgrade:

Press “Upgrade” to upgrade the firmware.

NOTE: To perform a Firmware Upgrade, you will need to connect a USB flash device with
the latest version of the firmware. Do not disconnect USB device or turn off the power of

the unit during the upgrade; this can cause the system to crash.

Configurations
Load Factory Default:

Click “Load” to restore all menu settings to the default values. User Account,

Network Setting, and Time are not affected.

Load From USB:

Click “Load” to upload saved DVR configuration settings from a USB flash device.

Save To USB:

Click “’Save” to save the current DVR configuration settings to a USB flash device.

Language:

Choose which language the DVR uses. The available languages may vary based on region.

Summary of Contents for Paragon 264 Series







































































































































Search results

Summary of Contents for Paragon 264 Series

Reviews:

Related manuals for Paragon 264 Series

Brands by name

Popular brands

EverFocus Paragon 264 Series, Instruction Manual

Search results

Summary of Contents for Paragon 264 Series

Reviews:

Related manuals for Paragon 264 Series

Brands by name

Popular brands