EverFocus Paragon 264 Series, Instruction Manual

Page: 119 / 134

112
7.4 REMOTE PTZ CONTROL
1. Use Direction Arrows (up, down, left, right) to move the camera to the desired direction and angle.
2. In
Zoom option, Click “ Z+” to zoom closer or “ Z-” to zoom farther away.
3. In Focus option, click “ F+ ” to increase the focus or click “ F- ” to decrease the focus.
4. In Iris option, you can increase the amount of light by clicking “ I+ ” or decrease it by clicking “ I- “.
5. To program a preset position
a. Move PTZ camera to the specified position
b. Click “ Preset ” button
c. Click the number of the desired position (This will be displayed in the box)
d. Click “ Set ” button
6. Steps to jump to a preset position
a. Click “ Preset ” button
b. Click the number of the desired position
c. Click “ Go ” button
7. Shortcut steps for presets #1-9
a. Click digit 1-9 button without clicking any other buttons
8. Steps to delete a preset position
a. Click “ Preset ” button
b. Click the number of the desired position
c. Click “ Delete ” button
9. Steps to run Auto Pan
a. Click “ Auto Pan ” button
10. Pattern Operation (Pattern is the “0” Tour in Everfocus and Pelco PTZ cameras)
a. Click “ Pattern ” button
11. Steps to run a tour