EFN3320 Fisheye Camera
65
For example:
If you set up the D/N level to 1 (lux), the camera will automatically switch from:
•
Day to Night when the light level is below 1 lux.
•
Night to Day when the light level has reached 3 lux.
If you set up the D/N level to 2 (lux), the camera will automatically switch from:
•
Day to Night when the light level is below 2 lux.
•
Night to Day when the light level has reached 4 lux.
Click
Apply
to apply the changes or
Cancel
to cancel the changes and return to the previous settings.
Day Profile/ Night Profile:
Select
Day Profile
to configure the following settings for daytime and select
Night Profile
to configure the following settings for nighttime. Click the
Apply
button to save the
settings.
【
Exposure Settings
】
This function can only be set up in the
Advanced
tab. This setting is used to adapt to
the amount or type of light used by the camera. Click
Apply
to apply the changes or
Cancel
to cancel
the changes and return to the previous settings.
Mode:
Select a mode from the drop-down list.
•
Auto:
Selecting Auto for the camera to automatically adjust the Shutter based on the
measured light level.
•
ALC (Shutter Priority):
Selecting ALC (Automatic Light Control) allows the camera circuitry
to either take bright spots more into consideration (peak), bringing out detail in bright areas,
or less into consideration (average) bringing out detail in shadows.
•
Manual:
Select this option to manually set up the IRIS, Shutter (Manual) and AGC (Manual)
values.
Shutter (Manual):
The function is only activated if you select
ALC
or
Manual
in the Mode field. If
enabled, this setting lets you set the shutter speed yourself (measured in fractions of a second).
AGC (Manual):
The function is only activated if you select
Manual
in the Mode field. Set the Auto
Gain Control limit here. The lower the AGC level, the lower the video signal and the noise.
Slow Shutter:
The function is only activated if you select
Auto
in the Mode field.
AGC:
The function is only activated if you select
Auto or ALC
in the Mode field. Set the Auto Gain
Control limit here. The lower the AGC level, the lower the video signal and the noise.
Flickerless:
The function is only activated if you select
Auto
in the Mode field. Choose between
OFF, 50HZ, 60HZ, 50HZ (High Luminance) or 60HZ (High Luminance).
