EFN3320 Fisheye Camera
33
Audio:
Click to turn on/off the audio function. This button is only appeared if your camera
features the audio-out cable. Click to play the camera audio through the computer’s
speakers. To activate the Audio function, the
Enable Audio
must be selected. See
Audio
Settings
in
7.2.1 Streaming and Audio
. Note that the camera provides a line out 3.5mm jack
(TRS), therefore, speakers with a (built-in) amplifier and external power supply are required.
Microphone:
This button is only appeared if your camera features the audio-in cable. Click to
switch the sound on/off for the microphones. To enable the icon, the microphones should be
connected to the camera directly or via the network. To activate the microphone function,
the
Enable Audio
must be selected. See
Audio Settings
in
7.2.1 Streaming and Audio
. Note
that the camera provides a line in 3.5mm jack (TRS), therefore, microphones with a (built-in)
amplifier and external power supply are required.
Setting:
Click to enter the general settings page (see
7. General Settings
).
ePTZ:
Click to display the PTZ control panel for operating the fisheye PTZ function (see
6.2
PTZ Settings
).
eZ Tracker:
Click to enter the eZ Tracker Setting page for operating the eZ Tracker function
and calibrating the images between the fisheye and speed dome camera (see
6.3 eZ Tracker
).
6.3.1
Installation Notice
Before using the eZ Tracker function, you have to install the fisheye and speed dome cameras correctly.
Ensure the following steps are properly done.
1.
The fisheye camera must be installed with Ceiling Mount (see
6.1 Ceiling / Desk Mount
). The eZ Tracker
function can only be applied for fisheye cameras mounted onto the Ceiling.
2.
The distance between the fisheye and speed dome cameras is suggested to be as close as possible. And
the lenses of both cameras should be aligned horizontally (speed dome camera lens face down).
Horizontally align the lenses
Distance as close as possible
