EverFocus eZ.HD ECOR HD 16F User Manual Download Page 129

Page: 129 / 158

ECOR HD 4F / 8F / 16F

121

6.9.7

Miscellaneous

You can upgrade the latest firmware, restore the factory default settings to the DVR, upload /

save the DVR configuration settings from / to the USB or change the language in this setup
menu.

Firmware

Current Firmware Version:

Shows the current firmware version of the DVR.

Upgrade:

Click to upgrade the latest firmware.

Configurations
Load Factory Default:

Click to restore the DVR to factory default settings. The User Account,

Network IP Settings, and Time settings will not be affected.

Load From USB:

Click to upload the DVR configurations restored in the USB flash device.

Save To USB:

Click to save the DVR configurations to the USB flash device.

Language:

Choose which language the DVR uses.

Allowed Remote Reboot:

Check the box to enable restarting the DVR via the Network.

Summary of Contents for eZ.HD ECOR HD 16F































































































































































Search results

Summary of Contents for eZ.HD ECOR HD 16F

Reviews:

Related manuals for eZ.HD ECOR HD 16F

Brands by name

Popular brands

EverFocus eZ.HD ECOR HD 16F, User Manual

Search results

Summary of Contents for eZ.HD ECOR HD 16F

Reviews:

Related manuals for eZ.HD ECOR HD 16F

Brands by name

Popular brands