manualshive.com logo in svg

EverFocus EQN22 Series, User Manual

Share
Download
EverFocus EQN22 Series User Manual Download Page 40

 

 

EQN2200 

 40

connection to the FTP server is unavailable. 
Normal: Follows the event action settings you have made in the “Event” menu to 
record event video to the SD card. 

Overwrite: Select ON for overwriting older data when the SD card memory is full. 
Select OFF for not overwriting the SD card data.   

Note:

 no recording can take place if the SD card is full and Overwrite is “Off”. 

 
Press 

Apply

 to apply the setting changes or 

Reset

 to reset without saving the 

change. 
 
SD Card Utility 
 

The total size and available

 

size of the SD memory card will be displayed. 

Depending on the state of the SD memory card, the information will be displayed 
as follows: 

 

Indication Description 

Capacity ___ MB, available ___MB, used ___ % 
 

Formatting the SD Card 

 

Before formatting the SD memory card, it is necessary to press the 

 

button.  

Once the 

  button is pressed, the 

  button will be shown for a 

user to re-insert the SD card. 
 
Press 

  button to format SD card.   

 
To obtain images from the SD memory card 
 

1. Access the SD card using the Windows command prompt 

 

or FTP client 

software.   

→

 The window with the user name and password entry fields will be displayed. 

2. Enter the user name whose access level is "1. Administrator" and its password. 

→

 Log in the camera.   

What about SUPERVISOR – will that work??

 

3. A directory of all saved data will be displayed. You are now ready to obtain 
images from SD card.   

Summary of Contents for EQN22 Series













































Reviews:

No comments

Brands by name

Popular brands

Load more brands